Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that blocks your car from starting if it does not have an exclusive pin code sequence, inputted via buttons already in use (such as the ones on the steering wheel or dashboard). The device is invisible for thieves and runs quietly.
It can also help deter newer methods such as hotwiring and relay thefts. You could also see an improvement in your insurance cost.
No Radio Frequencies
Ghost immobilisers differ from a conventional one in that it doesn't transmit radio frequency, which makes it impossible for thieves to bypass the device with a simple tool for cloning. A ghost immobiliser prevents your car from starting even in the event that a thief has copied or taken your key.
Ghost immobilisers are effective against so-called relay attacks. They involve amplifying the signal from your key fob in order to trick the system into allowing your vehicle to start. The Ghost will recognise this and not start the car until you enter the PIN code. This is a great way to stop thieves with access to low-cost and simple-to-use tools to steal or clone your car.
The Ghost can be installed discreetly and will not cause damage to your car. It will only function once the correct pin sequence has been entered. It will only be recognized by the person who set it up, meaning that nobody can use your car unless they know the pin sequence. Some systems allow the proprietor to set up a valet mode or service mode, which permits the owner to let someone else use their vehicle without revealing their pin code. This will protect the vehicle from thefts that could be triggered by opportunistic means.
The Ghost is not just easy to use and quick to disarm but can be connected to a car tracker so that you can locate your vehicle. Some insurers offer discounts on car insurance for vehicles equipped with Ghosts. This is a great benefit as it increases the security of your vehicle.
Although the Ghost immobiliser isn't Thatcham approved, it is an aftermarket item that has been tested independently and proved to be effective. If you're thinking about buying a used car that comes with the Ghost immobiliser fitted, then ask the seller if they're willing to transfer it to your new vehicle. This will ensure that your new vehicle is more secure than it was if the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit cuts means that even if the car has been stolen, thieves will not be able to begin it. They'll need to know the sequence of buttons used to unlock your car and will be unable to do so without being possessing this knowledge. This will discourage thieves from attempting to steal your vehicle.
If you have an GPS tracking device it, the Ghost could function as an anti-theft device. It can send a signal that will trigger a siren to alert the tracker of a theft attempt. This feature can be turned on at any time via your online dashboard.
When you link your Ghost to your CAN data network, it will identify the vehicle and its owner by the unique pin code that is created at the time of installation. g28carkeys enables the device to communicate with your car's ECU and immobilise the engine. This means that only the car's owner or a person with the PIN code, can start the engine.
Because the pin code was made from buttons that are within easy reach of the driver (such as cruise control and stereo mute) it is mathematically impossible to be guessed by potential thieves. Your engineer will provide you with the Pin Code Override Card that is like scratch-off tickets from lottery. It simply must be scratched to reveal the code.
Your Ghost isn't detected by these methods, as it does not use radio frequencies or circuit breaks. This makes it unaffected by the modern methods used by organized criminal gangs that specialize in RF scanning and code-grabbing technology. It is a product that lasts for a lifetime that is easily removed from your vehicle once you sell it. This means that you will not lose any of the security that you have invested in.
No Key Fobs
With rising vehicle theft in the UK It is imperative to take proactive measures needed to safeguard cherished cars from opportunistic thieves. The groundbreaking Ghost Immobiliser Autowatch's Ghost Immobiliser Autowatch offers a solid defense against key cloning, hacking and signal relay attacks. It is a discrete and highly effective car security system that is easy to install in a vast variety of vehicles.
The Ghost immobiliser isn't a traditional system that relies on key fobs. It also does not utilize an electronic signal relay. It is not affected by signal interception, and it is not able to be activated by stolen or damaged remotes. It's also tamperproof and doesn't have any external wiring, making it difficult to take off or disable.
It safeguards you from key-long hacking as well as key theft by preventing your engine from starting until a unique PIN is entered. This is done by using buttons that are already on the vehicle, for example those on the steering wheel and doors.
This is the only method you have to start your engine and it only works if you have entered the correct pin code. This makes it difficult for thieves who are opportunistic to steal your car. It is designed to be simple to use. If you're worried about forgetting the pin code, the installer can provide you with an emergency driver fob that lets you operate your car as usual.
The Ghost immobiliser isn't detected by devices for diagnosis, such as RF scanners or other tools employed by thieves. This stealth installation increases the effectiveness of the system and permits it to be put in a place that is difficult for thieves.
Ghost immobilisers are an inexpensive, yet highly efficient in preventing thefts and increase the value of your vehicle. They are also recognized by some insurance companies and may result in reduced rates.
No Damage
If your vehicle is equipped with a ghost immobiliser you will have the peace of mind in knowing that your vehicle is protected against hacking, cloning, key-fob theft and other common methods of theft. This is especially important if you've invested an enormous amount of money and time making your vehicle more unique or have an expensive or rare model. Ghost immobilisers operate silently and leaves no trace of instillation and requiring no new parts to be fitted.
The system uses buttons in your steering wheel, center console or door panels and enables you to set up a pin code sequence that must be entered before the engine can be started. The sequence can be changed by you at any time, which means that even if someone knows your pin number it is not possible for them to start your car. It is also simple to deactivate the device in an unservice valet mode to allow your car to be removed to be cleaned, serviced or for an MOT without being activated.
This means that even if the vehicle is stolen or cloned the thief will not be in a position to start your car and be caught in the act. The system can also alert you to any tampering of the wiring of your vehicle for example, signal interference or cutting. This information can be sent to your smartphone to ensure that you are aware of the security status of your vehicle.
You may want to turn off or remove the Ghost Immobiliser for some reason, such as for maintenance or for resales. In this case you must be extra careful not to cause damage to the wiring in your vehicle. It is strongly recommended that you wear protective gloves during this procedure, and also use a flashlight to illuminate the dark areas of your vehicle where the immobiliser could be. You may also refer to any documentation you might have such as user manuals or installation instructions, to determine the exact location of the device.
After the immobiliser has been disconnected from your vehicle's wiring system, you can reconnect the battery to your car and then test to ensure that it works as intended and that all electrical components are working as intended. The next step is to connect any wires that were cut using electrical tape or soldering when required. Make sure that no exposed wires are present and that any hanging wires are secured by zip ties or other appropriate means. Also, schedule a car check-up with a professional to make sure that the removal process did not damage any other systems in your vehicle.